DT105-NM
Rotary Stages
Rotary stage for demanding positioning solutions. Driven by a piezo motor.
Highly dynamic rotary stage
The DT105 rotary stage provides high dynamics and speed. It is equipped with a piezo drive which, in combination with a high resolution angle measuring system, allows comparatively high torques at very small step sizes.
Flexible drive concept
To position greater loads, it is optionally possible to equip the rotary stage with up to four piezo motors. The rotary stage can also be easily combined with the MT105 micro stage to form a multi-axis system.
Use in demanding ambient conditions
In the vacuum and non-magnetic version, the DT105 rotary stage is perfect for applications in challenging environments. The areas of application for this rotary stage include research and development or experimental physics.
| DT105 | -1NM-W | -2NM-W | |
| Travel | [deg] | nx360 | nx360 |
| Repeatability unidirectional | [deg] | ± 0.0005 | ± 0.0005 |
| Repeatability bidirectional | [deg] | ± 0.001 | ± 0.001 |
| Accuracy | [deg] | ±0.005 | ±0.005 |
| Excentric runout | [μm] | ±6 | ±6 |
| Positioning speed | [deg/s] | 180 | 180 |
| Max. acceleration | [deg/s2] | 10000 | 10000 |
| Max. load Fz | [N] | 30 | 30 |
| Max. load torque Mz | [Nm] | 0.4 | 0.8 |
| Max. load torque Mx,y | [Nm] | 5.5 | 5.5 |
| Weight | [kg] | 0.9 | 1 |
| DT105 | -4NM-W | |
| Travel | [deg] | nx360 |
| Repeatability unidirectional | [deg] | ± 0.0005 |
| Repeatability bidirectional | [deg] | ± 0.001 |
| Accuracy | [deg] | ±0.005 |
| Excentric runout | [μm] | ±6 |
| Positioning speed | [deg/s] | 180 |
| Max. acceleration | [deg/s2] | 10000 |
| Max. load Fz | [N] | 30 |
| Max. load torque Mz | [Nm] | 1.6 |
Designs for cleanroom, beam and vacuum
Almost all atmospheric standard systems are anodized with UHV lubrication for residual pressures up to 10E-6 mbar and min. cleanroom class ISO 6 - or even better - available.
Overwiew cleanroom & vacuum systems Contact technical consultants
Are you looking for a technical solution for your application?
Get your first 3D Design in a few days:
Elger Matthes
Development, Consulting, Concepts, Innovation
| T +49 (0) 351 88585-82 |
Francisco Samuel
Consulting &
Project Management
| T +49 (0) 351 88585-85 |
Ronald Schulze
Consulting, Project Management & Engineering
| T +49 (0) 351 88585-67 |
Our references