XYZ positioning system for laboratory analysis | ball screw drive, stepper motor, profile rail | travel 400 x 400 x 900 x 40 mm
Combinations of laboratory axes

AB.Raman

The 2X-Y-Ys(Z) positioning system provides high-resolution motions in XYZ for samples up to 400 x 400 mm with additional feeding range and loads up to 40 kg. The gantry structure handles the XY motion. With a double-length travel in the upper axis, a feeding range of further 400 mm is realized in addition to the 400 mm operating travel in XY. Vertical motions and the focus are realized by an inclined stage with simultaneous motion of the Y-axis. The inclined travel is part of the feeding range. The vertical motion in Z is performed by simultaneous control of the Y and Ys ax

Various scanning areas up to 400 x 400 mm for wafer up to 12 inch / panel up to 400 mm (larger on request)

Traverse for optics holder

Combined motion of wedge and traverse for height adjustment (additional feeding range of 400 mm).

Gantry combination for maximum rigidity and high loads up to 50 kg

Wartungsarm bei 24/7-Betrieb bis Reinraumklasse ISO 4 (höher auf Anfrage)

Options:

Linear scale for 0.5 µm repeatability
Scanning stages with high-precision ball screw, lead screw or linear motor for high throughput
Tilt stages for aligning the chuck
High-resolution rotary stage for measuring round samples
Adaptation to the process: Aperture, sample holder, extension of additional (motorized) stages
Safety concept and technology (emergency stop, door switch, light grid, laser scanner, STO, SLS)
Individual setup with rack, enclosure or integration into the fab
Customized development with 3D design, prototypes, series production

Fields of application

Inspection Systems, Laboratory Systems, chucks, wafers, chips, lithopraphy equipment, wafer steppers, dicing, display manufacturing, physical surface analysis, drug development, Assey development, screening, drug optimization, material testing

Specifications

AB.Raman.V3		2X	Y	Z (Ys)
Standard System		PLT165-SM-L	PLT240-SM-L	PLT165-SM-L
Travel	[mm]	400	900	40
Repeatability unidirectional	[µm]	± 0.3	± 0.3	± 0.3
Repeatability bidirectional	[µm]	± 0.5	± 0.5	± 0.5
Positioning speed	[mm/s]	40	40	10
Max. speed	[mm/s]	80	80	20
Max. load	[N]	0	0	400
Max. sample dimension		Ø 400 mm / 12" (higher on request)
Length x width x height	[mm]	1500 x 1100 x 1000
Drive		Ball Screw, optional Lead Screw or Linear Motor
Spindle type		1412.570/5.16.539.644 P5P / 222138
Spindle lead		5	5	5
Guide		Profile Rail	Profile Rail	Profile Rail
Motor		Stepper Motor	Stepper Motor	Stepper Motor
Feedback		Linear Scale (optional Open Loop)
Optional features		Design with linear motors for dynamic applications, Linear scale for 0.5 µm repeatability, tilting stages for alignment of the chuck, rotary stage, brake, sample holder, housing, safety concept and installation (emergency stop, door switch, safety light curtains, laser scanner, STO, SLS)
Clean room variants		up to clean room class ISO 4 (higher on request)
Beam variants		UV, DUV (EUV, X-ray, gamma on request)
Variants magnetism		magnetic (low magnetic on request)